承压达10000psi，流速范围0-300ml/min，双泵头连续送液，能够满足高压大流量稳定输送液体的需求。

CP300精密恒流泵产品特点

面板键盘可设定以下功能：

流速设定/显示            排液/排气

低/高压限设定           压缩性补偿设定

压力单位设定(PSI, MPa或bar)   控制方式设定(键盘，微机或外部模拟信号)

显示亮度              实时监测压力限值

参数：   

low Rate Range 0.1 – 300.0 mL/min

Flow Rate Increment 0.1 mL/min

Flow Rate Accuracy* ±5% (5.0 – 300.0 mL/min; 80:20 Water/IPA; 1,000 psi)

Flow Reproducibility 0.5% RSD (5.0 – 300.0 mL/min; 80:20 Water/IPA; 1,000 psi)

Maximum Delivery Pressure 220 VAC supply: 10,000 psi

110 VAC supply: 10,000 psi (up to 250mL/min—see chart below for pressure rating curve)

Pressure Accuracy ±50 psi

Pulsation ≤5.0% @ 150 mL/min and 80:20 Water/IPA; 3,000 psi

Piston Displacement 452 µL

Piston Wash Self-flushing pump heads – continuous wash without auxiliary pump

Wetted Materials 316 Stainless Steel, Alumina, Zirconia, UHMWPE, PTFE, PEEK

Dimensions (H x W x D) 8.9” x 13.9” x 22.1” (22.6 x 35.3 x 56.1 cm)

Weight 50.0 lbs (22.7 kg)

Power 100 – 240 VAC (±10%), 50 – 60 Hz, 700 W

Front Panel LCD display to monitor flow rate, pressure, and indicate parameters and alarms. Numerical keypad, Run/Stop, and Menu Navigation.

Communication RS-232 (serial communications), Run/Stop TTL

Viscosity** 0.5 – 10.8 cP

Liquid Temperature 0 – 82 °C

Environment Indoor use only (Pollution degree 2)

Altitude Up to 2000 m (6500 ft)

Ambient Temperature 10 – 30 °C

Humidity 20 – 90% relative humidity

*Flow Rate is dependent on solvent selection and operating pressure. **Range of fluid viscosities where published flow accuracy is maintained.